A card for a special friend

A dear friend of mine who has been widowed for a number of  years is getting married this month, and I decided to make a wedding card for her and her groom.

I first stamped the couple (Inkadinkado)  and coloured it with Lyra colour pencils. I made a mask and covered the stamped image with it, the did the background.

The background was done with Fluid Chalk inks, then I stamped Mica Magic Yellow Gold with a heart stamp in various areas.

I just bought a gorgeous flourish stamp by Hero Arts, and decided to use it on the card. I left the mask in place on the cardstock and stamped the flourish with Pigment Goldrush ink and embossed it with Ancient Gold Embossing powder. After heat setting, I removed the mask.

I played around with various ideas to put at the top left corner to finish the card. I tried various stamps using my stamp positioner to see how they would look, but did not like any of them. I finally decided on using die cut letters, (cut out 3 times and glued togehter to make them thicker) to spell out LOVE. Again, I fiddled with various mediums on them, and finally settled on embossing them with the same Ancient Gold embossing powder.

I edged the card front with a marker and adhered the panel to a card base in a mustard yellow colour.

Dream Destination - Africa

For this month on CCSwaps the dream destination is Africa.

I used some leaf stamps for my background as they were the only thing I had to simulate the type of background I had in mind. I used Clearsnap fluid chalks in bisque, tangerine and Burnt Seinna on two pages and on the others I added dark moss.

I stamped the image from Coronado Island on a kraft coloured piece of card stock and cut it out. I added the frame then attached the image in the centre. The words are from a large Sandi Miller Art stamp that I cut out after I stamped them. I took some chip board letters from the dollar store and coloured them and stamped over them and attached them with Sookwang tape.

The inside images are from a UK site and the words are from the same Sandi Miller background stamp.

To attach the two pages together I cut two pieces of cardstock that I had coloured and stamped, scored them and attached them with double-sided foam tapes. It then added a couple of little faux rivets that I made from clay and coloured with Mica Magic ink.

The back piece is a picture framed with a slide mount which I covered with some scapbook paper, then stamped a PSX Pixie Expressions stamp around it.

Smooch Inks

I am participating in a HIT swap where we use Smooch inks on the card that we create.

I started by doing a technique called stamp smoosh using Clearsnap Fluid Chalk inks, which I learned from Cathie Allan who is a wonderful teacher. This was the background for the card.

I then stamped the Hearts in Touch stamp with Olive Fluid chalks then cut it to size. I stamped and embossed the HIT floral stamp twice on the card background piece then on a separate piece. I coloured them with Smooch ink Pool and Azure, using Pumpkin for the centre. The leaves were coloured with Smooch Green Apple. I then cut out the flowers and the little bee I left separate. The body of the bee was coloured with Gold Lame` and  Sugarberry and the wings with Moonlight.

I attached the stamped image of the woman to the card then added the bees and the extra flower with double-sided foam tape. I attached the whole piece to a coordinating colour of cardstock.

I have a brayer

I joined a swap in CCSwaps called "I have a brayer and I know how to use it!"  For this swap we were to  make a card for our partner, but I missed that part and started off by making a large tag. I realized I had goofed later on so back to the drawing board.

 I brayered yellow Vivid ink (Clearsnap) on glossy card a bit more than halfway. I punched out a circle and laid it on the cardstock. I brayered on butterscotch Vivid over the yellow, but lightly over the circle area. I then brayered raisin Adirondack (Ranger)over the top portion.

I tore a piece of paper and laid it on the bottom portion of the cardstock and brayered with aqua Vivid then removed the paper and brayered Big and Juicy Hydrangea (Ranger) over the very bottom.

I stamped the trees (Stampin' Up) and the geese (Stampscapes) with Ancient Page Coal Black (Clearsnap). I added some red Marvy Matchable ink over the top portion with a sponge, for more depth. I outlined the edges with a dual marker.

I brayered another piece of scrap cardstock with the yellow and butterscotch Vivid and stamped and embossed the saying (Stamp Oasis) with Versafine Onyx Black (Tsukineko) and black embossing powder), outlined the edges and attached it with double-sided foam tape.

I had some brayered and stamped pieces left from another project that I did not like so I cut them up and added them to the inside of the card. I stamped another saying(Wordsworth) on yellow cardstock and attached it beside the scrap pieces.

     

Quote of the Month - January and February

I am participating in a swap on CCswaps where we create a piece of art using a quote for that month, which must be displayed somewhere on the art. The quote is: "Great art picks up where nature ends."

For January I used a piece of cardstock and did the Stamp Smooshie technique (you use your stamp as an applicator and smoosh the ink around on the paper-usually 3 different tones of the same colour ink). I then added some mica magic ink over it. I stamped the Safflower Script stamp (Stampington) on a piece of acetate with Stazon black ink and attached it with vellum tape.

I had a piece of cardstock on which I had rubbed off some Mica Magic ink while doing some stamping and liked the look of it, so I chose that to stamp the Magenta butterfly image on and attached it to the middle of the acetate.

I mounted the piece on another piece of Mica Magic coloured background. The final touch was to add the maple leaf brads and the quotes. This is now at it's new home with Maggi.

The February quote is: "Feet what do I need thee for when I have wings to fly." I decided on an altered book board. I used some techniques from Kelly Rae Roberts book Taking Flight. I am really pleased with the book as it has great inspiration and some step-by-step instructions and not just a bunch of "pretty pictures".

The background is similar to one that I learned in an Altered Diva class, where you paint gesso on the substrate, add one coat of paint. let it dry then add another coat and while wet spray it with water, let it sit for a bit then dab it with a cloth. The little circles in white were made by dipping the end of an adding machine roll holder thingy in paint and stamping on the book board.

The body was a stamp (PSX) of a seamstress mannequin which I stamped into polymer clay and baked. When it was ready I rubbed it with a wash of brown acrylic paint, then painted the flowers, heart and ribbon and body with acrylic paint and brushed some Pearlex and Perfect Pearls over the top.

When it dried I coated it with Poly Glaze, then when that set I rubbed some "Goldfinger rub-on paste over it and glued on the gems.

The head is an image from a magazine advert which I cut down and glued into a flattened bottle cap and filled with Glossy Accents. The gold wings were left over from when I was making some Christmas Angels years ago; cut in the middle to reduce the bulk and glued behind the body and added some gold Stickles to enhance them a bit. The seagull was a found item in my stash. This will be going to it's new home at the end of February when the partners list is announced.

Embossing Mania

I participated in another swap on CC Swaps where we had to use some form of embossing. I decided to use a technique I learned in a class I took from Cathie Allan at Western Educational Activities. Cathie is a regular contributor to Scrap & Stamp Arts and always is an inspiration to me. She tells you not to get too hung up on making the class project perfect, but to learn the technique in class then go home and play with different mediums and ideas and have fun.

I started with some Monoprinted background paper that I had made using Pinata` Inks and a Krylon Gold leafing pen. I cut the panel to size and stamped a background stamp by Judikins with a clear embossing pad and embossed with clear embossing powder. I edged the panel with gold Krylon leafing pen and layered it on black cardstock

I then took a small piece of the Monoprinted paper, cut a piece of paper towel and laid it over the stamp from Coronado Island. I cut around the area of the stamp image and laid it on top of the small piece of monoprinted paper and dabbed Stazon ink remover on top, smooshed it with my finger and left it for a few minutes. This removes some of the ink from the paper and leaves a faint background.

I stamped the image from Coronado Island on the paper using Colorbox Volcanic Black Pigment ink and embossed it with black embossing powder. I edged the piece with the Gold Krylon leafing pen and layered it on black cardstock and adhered it to the main panel.

I took a stylestone and inked it with Pinata` Ink and let it dry. I stamped the word stamp from PSX with the Volcanic black and embossed it with black embossing powder and edged it with the gold Krylon leafing pen. I adhered it to the panel with E6000.

The piece is now on it's way to Sheryl.